Cleaner 5 Windows MP3 16k settings


1) Launch Cleaner

2) Select File > New Batch > save name (i.e. session1)

3) Select File > Open (ctrl+O) > choose .mp3 file (create a small test file)

4) Highlight source file(s)

5) Right click on file(s) select advanced options, or choose ctrl+t

6) Select MP3 (clicking on it will expand the MP3 menu)

7) Choose 'MP3 streaming modem VBR'

8) A list of settings will appear on the right of that dialog box

9) Output Tab - default settings (.mp3 file suffix is the important thing here)

10) Audio Tab -
		sample rate 11.025
		data rate 16 kbits/sec
		channels - mono
		volume - adjust (not normalize) 165%
		low pass - suppress above 8khz
		high pass - suppress below 50 hz

11) Begin/End - no settings

12) Summary - look over the settings and make sure they correlate to the settings listed above

13) Choose Save As > name the compression profile > choose the location (i.e. Mp3 - session)

14) Click apply

15) Select the play icon at the bottom of the batch dialog box

16) THis will bring up a file location window. Choose the location to save the compressed MP3

17) When you have achieved satisfactory results with the test file (you may need to adjust the volumn settings, etc.) run a batch (drag and drop all of the session files from a folder, highlight all and compress)